Energy Harvesting Using ZnO Nanosheet-Decorated 3D-Printed Fabrics.

In this work, we decorated piezoresponsive atomically thin ZnO nanosheets on a polymer surface using additive manufacturing (three-dimensional (3D) printing) technology to demonstrate electrical-mechanical coupling phenomena. The output voltage response of the 3D-printed architecture was regulated by varying the external mechanical pressures. Additionally, we have shown energy generation by placing the 3D-printed fabric on the padded shoulder strap of a bag with a load ranging from ∼5 to ∼75 N, taking advantage of the excellent mechanical strength and flexibility of the coated 3D-printed architecture. The ZnO coating layer forms a stable interface between ZnO nanosheets and the fabric, as confirmed by combining density functional theory (DFT) and electrical measurements. This effectively improves the output performance of the 3D-printed fabric by enhancing the charge transfer at the interface. Therefore, the present work can be used to build a new infrastructure for next-generation energy harvesters capable of carrying out several structural and functional responsibilities.

Spontaneous hydrogen production using gadolinium telluride.

Developing materials for controlled hydrogen production through water splitting is one of the most promising ways to meet current energy demand. Here, we demonstrate spontaneous and green production of hydrogen at high evolution rate using gadolinium telluride (GdTe) under ambient conditions. The spent materials can be reused after melting, which regain the original activity of the pristine sample. The phase formation and reusability are supported by the thermodynamics calculations. The theoretical calculation reveals ultralow activation energy for hydrogen production using GdTe caused by charge transfer from Te to Gd. Production of highly pure and instantaneous hydrogen by GdTe could accelerate green and sustainable energy conversion technologies.

Engineering the Charge Density on an In2.77S4/Porous Organic Polymer Hybrid Photocatalyst for CO2-to-Ethylene Conversion Reaction.

The development of an efficient photocatalyst for C2 product formation from CO2 is of urgent importance toward the deployment of solar-fuel production. Here, we report a template-free, cost-effective synthetic strategy to develop a carbazole-derived porous organic polymer (POP)-based composite catalyst. The composite catalyst is comprised of In2.77S4 and porous organic polymer (POP) and is held together by induced-polarity-driven electrostatic interaction. Utilizing the synergy of the catalytically active In centers and light-harvesting POPs, the catalyst showed 98.9% selectivity toward the generation of C2H4, with a formation rate of 67.65 µmol g-1 h-1. Two different oxidation states of the In2.77S4 spinel were exploited for the C-C coupling process, and this was investigated by X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and density functional theory (DFT) calculations. The role of POP was elucidated via several photophysical and photoelectrochemical studies. The electron transfer was mapped by several correlated approaches, which assisted in establishing the Z-scheme mechanism. Furthermore, the mechanism of C2H4 formation was extensively investigated using density functional theory (DFT) calculations from multiple possible pathways.

Intrinsic Charge Polarization in Bi19 S27 Cl3 Nanorods Promotes Selective CC Coupling Reaction during Photoreduction of CO2 to Ethanol.

Obtaining multi-carbon products via CO2  photoreduction is a major catalytic challenge involving multielectron-mediated CC bond formation. Complex design of multicomponent interfaces that are exploited to achieve this chemical transformation, often leads to untraceable deleterious changes in the interfacial chemical environment affecting CO2  conversion efficiency and product selectivity. Alternatively, robust metal centers having asymmetric charge distribution can effectuate CC coupling reaction through the stabilization of intermediates, for desired product selectivity. However, generating inherent charge distribution in a single component catalyst is a difficult material design challenge. Here, a novel photocatalyst, Bi19 S27 Cl3 , is presented which selectively converts CO2  to a C2  product, ethanol, in high yield under visible light irradiation. Structural analysis through transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy reveals the presence of charge polarized bismuth centers in Bi19 S27 Cl3 . The intrinsic electric field induced by charge polarized bismuth centers renders better separation efficiency of photogenerated electron-hole pair. Furthermore, charge polarized centers yield better adsorption of CO* intermediate and accelerate the rate determining CC coupling step through the formation of OCCOH intermediate. Formation of these intermediates is experimentally mapped by in situ Fourier-transform infrared spectroscopy and further confirmed by theoretical calculation.

Selective Reduction of CO2 on Ti2C(OH)2 MXene through Spontaneous Crossing of Transition States.

Direct reduction of gas-phase CO2 to renewable fuels and chemical feedstock without any external energy source or rare-metal catalyst is one of the foremost challenges. Here, using density functional theory and ab initio molecular dynamics (AIMD) simulations, we predict Ti2C(OH)2 MXene as an efficient electron-coupled proton donor exhibiting simultaneously high reactivity and selectivity for CO2 reduction reaction (CRR) by yielding valuable chemicals, formate, and formic acid. This is caused by CO2 spontaneously crossing the activation barrier involved in the formation of multiple intermediates. Metallic Ti2C(OH)2 contains easily donatable protons on the surface and high-energy electrons near the Fermi level that leads to its high reactivity. High selectivity arises from low activation barrier for CRR as predicted by proposed mechanistic interpretations. Furthermore, H vacancies generated during the product formation can be replenished by exposure to moisture, ensuring the uninterrupted formation of the products. Our study provides a single-step solution for CRR to valuable chemicals without necessitating the expensive electrochemical or low-efficiency photochemical cells and hence is of immense interest for recycling the carbon.

Interfacial Electron Transfer Strategy to Improve the Hydrogen Evolution Catalysis of CrP Heterostructure.

Though several Pt-free hydrogen evolution reaction (HER) catalysts have been reported, their employment for industry is challenging. Here, a facile pyrolysis method to obtain phase-pure CrP nanoparticles supported on N, P dual-doped carbon (CrP/NPC) is reported to be tuned toward industrial HER. Interestingly, CrP/NPC exhibits excellent HER activity that requires an overpotential of 34 mV to attain a current density of 10 mA cm-2 , which is only 1 mV positive to commercial Pt/C and a potential of 55 mV to achieve a current density of 200 mA cm-2 which is better than Pt/C. In addition, the long-term durability of CrP/NPC is far superior to Pt/C due to the strong interaction between CrP and C support, restricting any agglomeration or leaching. Density functional theory (DFT) calculations suggest that electronic modulation at the interface (CrP/NPC) optimizes the hydrogen adsorption energy. The Cr-Cr bridge site with required density of states near the Fermi level is found to be the active site. Overall, this report provides a practical scheme to synthesize rarely investigated CrP based materials along with a computational mechanistic guideline for electrocatalysis that can be utilized to explore other phosphides for various applications.